Kenmore 1030 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
CONMECTiryO MACHINE
0
0
1.
Lift hinged extension at the left
side of machine bed-plate.
2.
For more sewing space, tip the
bed
plate
cover
up
by
pushing
right edge as shown in Fig. 2.
Turn
the
accessory
box
toward
you as shown in Fig. 2.
3.
Fig. 3. shows the machine ready
to sew with all the extensions in
place for maximum sewing space.
a t
4.
Push the plug onto three-prong
connector at the back of machine
column.
5.
Plug machine cord into any 11Q-
120
volt
wall
outlet.
Turn
on
power by pushing light and power
switch.
6.
Pull up spool pin stored at top of
machine.
Advertising