Heavy duty, Normal / casual, Delicate – Kenmore W10026671A User Manual

Page 6: Rinse & spin, Spin only, Sounds and leaks

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

IL

• You should select the wash/rinse water temperature based on the type of load you are washing.

• Always use the warmest wash water safe for fabric and follow garment label instructions. For recommended use, see the Use

and Care Guide.

• Depending on location, water temperatures may vary by season. The fill rate may also differ depending on the water

temperature selected.

A

Heavy Duty

Use this cycle for cottons and linens used regularly.
For maximum soil removal, you should set the Cycle
Selector (Timer) Control for the longest available time.

Normal / Casual

Select this cycle for synthetic fabrics such as dress shirts,
blouses, and slacks. The cycle will give you a load-cooling
spray rinse to reduce wrinkling.

Delicate______________________________

This cycle features brief periods of intermittent agitation
to clean lightly soiled items.

Rinse & Spin

Select this option if you think an extra rinse is needed. Set
OPTIONS Control (If available) to One Rinse. You should then
set the Cycle Selector (Timer) Control knob to a Rinse setting.

Spin Only

A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set OPTIONS Control (if available)
to One Rinse. You should then set Cycle Selector (Timer)
Control to a Spin setting.

TiiiiLESiOOTIiG

- SOUNDS and LEAKS

Before you call

service...check

for the following.

Loud clicking and banging?

• The yellow shipping strap may still be in the rear of the

washer. Completely remove the yellow shipping strap.

• The washer should be level, and the feet should be firmly

on the floor.

Some sounds are normal but may be different from
those of your previous washer.

• The gears engaging after the drain and before the spin.

• The sound of air being pulled through the pump after most

of the water has drained.

Is the washer leaking?

• Fill hose connections are tight

• Gaskets in fill hose are tight and flat

• Drain hose clamp Is securely attached

• Faucets, drain/standpipe, or laundry tub is not leaking

• The washer tub is centered, and the load evenly balanced

at the start of each load

• The washer Is level

• The front feet are installed, and the nuts are tightened

to the cabinet

See the Use and Care Guide for complete details.

W10026671Â

© 2008 Sears Brands, LLC.

® Registered Trademark / ™ Trademark / Service Mark of

Sears Brands, LLC, used under iicensee by Sears Canada Inc.

7/08

Printed in U.S.A.

Advertising
This manual is related to the following products: