Mп^j no 4, Ib5.ì, Mrim – Sharp Atomic clock User Manual

Page 8: I ib

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2.

Relocate the clock or transmitter in other positions

and make sure the transmission is within the effective
range of 30 meters approx.

3.

After several trials in vain, please reset the clock

thoroughly. Try out where your multifunctional alarm
clock receives the signals best.

CHECKING AND DELETING MAX./MIN. TEMPERATURE
RECORDS

1

.

2

.

Press the “MAX/MIN” button once to check the
maximum temperature records. Press it twice to
check the minimum records. Press it again to exit.
Press and hold the “MAX/MIN” button for 3 seconds to
delete the max. and min. temperature records.

MAX. Temperature records

DAY

mп^j

no 4

OUTTEMP

IB5.Ì

IN TEMP

MIN. Temperature records

DAY

mriM

IMUN

OUT TEMP

I IB

IN TEMP

m

BATFERY REPLACEMENT

If the low battery indicator appears beside the outdoor

temperature of main unit, it indicates that you should replace

batteries of transmitter at once.

13

While if the low battery indicator displays beside the indoor
temperature, it means that the battery power of the main

unit is not enough and you should replace batteries in

the clock immediately.

Transmitter’s low battery indicator Main unit’s low battery indicator

(shows on the main unit)

(shows on the main unit)

NOTE:

Attention! Please dispose of used unit or batteries in an
ecologically safe manner.

USING THE TABLE STAND OR WALL-MOUNTING STAND

The receiver and transmitter both have the desktop and
wall-mounting structures.

For the Clock, place the screw in the desired wall and
hang the receiver by the recessed hole on the back of the

clock or simply place it on the desktop by its table stand.

For the Transmitter, place the screw in the desired

o u t s i d e wall and hang the separate wall-mounting part

in an area protected from direct rain. Once the stand is
mounted, place the transmitter into the stand on the wall.

You can also place it on the desktop by its table stand.

14

Advertising
This manual is related to the following products: