Sharp AQUOS LC-37GP1U - Manual (Page 37)

Useful adjustment settings
;'Sfe;ep;fl!ììBr'
Lets you set the input terniiriot ■disi'jloyed when using
the INPUT SOURCE menu or channel display.
INPUT FLASHBACK o
VOL CH
SURROUNC
O
FREEZE
O
MUTE
O
MENU
0
Lvi
O
URN
O
I
Press INPUT to select the desired input
source.
.2
Press MENU to display the MENU screen, and
then press < 4 /^ to select “Setup”
i Press a /T to select “Input Label”, and then
'' press ENTER
■ 'ess to select the new name for
the input mode, and then press ENTER.
Allows you to set a time when the TV automatically
switches to standby.
-------- FAVORITE CH ------------
© © © ©
FAVORITE
a
SLEEP AUDIO AVMODE CC
O O O O
Press SLEEP
« The remaining time displays when the sleep timer
has been set.
Sleep Timer Remaining
Each time you press SLEEP, the remaining
time switches as shown below.
• When set, the time automatically starts counting
down.
« If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
* Five minutes before the time expires, the
remaining time displays every minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
• The TV will enter the standby when the remaining time
reaches zero.
• When the sleep timer is set, its indicator on the TV lights
red.
'ess MENU to exit.
NOT
You cannot change labels if the INPUT SOURCE is TV.
®- 36