1 source power, 3 flashback, 3 enter – Sharp AQUOS LC-37GP1U User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
other viewing options
3
4
■ Cable control buttons
When the FUNCTION is set to CBL/SAT, the cable converter connected to
the TV can be operated using 1 to 4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0-9
Press a button (or buttons) that corresponds to the channel that you wish
to watch.
3 FLASHBACK *
Press to switch between the current channel and the channel you were
watching immediately before.
4 СНЛ/V
Press СНЛ or CHV to tune in a higher or lower channel.
* Some manufacturers
do not
preset
FLASHBACK.
• GABLE and SAT cannot be selected at the same time.
■ SAT control buttons
1 SOURCE POWER
Turns the cable converter power on and off.
2 0-9, • (DOT)
Press a button (or buttons) that corresponds to the channel that you wish
to watch.
3 ENTER,
ENTER: Press to activate the selected function.
A/T/-^/^: Press the button to select items on the SAT GUIDE screen
or SAT MENU screen.
» CABLE and SAT cannot be selected at the same time.
® -
51