Clarion iDXZ775USB - Manual (Page 30)

Operations Common to Each Mode
English
28
DXZ775USB
● Setting the dimmer control
You can set the dimmer control “ HIGH ”, “ MID ”,
“ LOW ” or “ OFF ”.
∗
The factory default setting is “ MID ”.
2-1. Select “ DIMMER ”.
3-1. Push the [ P.CH ] button upward or
downward to select the setting.
“ HIGH ” ↔ “ MID ” ↔ “ LOW ” ↔ “ OFF ”
● Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗
The factory default setting is “ OFF ”.
2-1. Select “ BLINK LED ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ ON ” or “ OFF ”.
● Setting the external amplifier
∗ The factory default setting is “ OFF ”.
2-1. Select “ AMP CANCEL ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ ON ” or “ OFF ”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
● Setting the car speaker output for the
cellular phone
When the AUX input cable is used to connect a
AUX BLUETOOTH BB (BLT370) (sold
separately).
∗
The factory default setting is “ R ”.
∗
To output the telephone calls, set the cellular
phone interrupt to ON.
2-1. Select “ TEL-SPEAKER ”.
3-1. Push the [ P.CH ] button upward or
downward to select “ R ” or “ L ”.
• R:
Telephone calls can be heard on the front
right speaker connected to this unit.
• L:
Telephone calls can be heard on the front
left speaker connected to this unit.
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
When the AUX input cable is used to connect a
AUX BLUETOOTH BB (BLT370) (sold
separately).
∗
The factory default setting is “OFF”.
2-1. Select “TEL-SWITCH”.
3-1. Push the [P.CH] button upward or
downward to select the setting in the
following order:
“OFF” ↔ “ON” ↔ “MUTE”
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗ When listening to your calls on your car
speakers, you can adjust the volume by
pushing the [P.CH] button upward or
downward.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
● Performing a system check
2-1. Select “SYSTEM CHECK”.
3-1. Press and hold the [ ] button for 1
second or longer.
“SYSTEM CHECK” appears in the display,
then the unit returns to the speaker system
selecting mode.
DXZ775USB_EN.book 28 ページ ２００６年１２月２５日 月曜日 午前１１時３７分