Canon A630 - Manual (Page 22)

20
1.
Set the mode switch to (playback) (a).
The last image that was played back appears. If
additional images were shot after viewing
images in playback mode, the last image that
was shot will appear instead. If the memory card
has been switched, or the images on the
memory card have been edited with a computer,
the newest image on the memory card appears.
2.
Use the or button to display the image you wish to view (b).
Use the button to move to the previous image and the button
to move the next image.
Holding the button down advances the images more rapidly, but
shows them less clearly.
1.
In the playback mode, use
the or button to select
an image to erase (a) and
press the button (b).
2.
Confirm that [Erase] is selected and
press the FUNC./SET button (c).
To exit instead of erasing, select [Cancel].
Playback
Î See the Advanced Guide for the various playback methods available.
Erasing
Please note that erased images cannot be recovered.
Exercise adequate caution before erasing an image.
Î See the Advanced Guide: Erasing All Images (p. 90).