Canon A650 IS - Manual (Page 124)

Various Shooting Methods 122
To Cancel the Shortcut Button
Select
in Step 2.
Using the Button
See Functions Available in Each Shooting Mode (p. 207) .
*1 Only [Grid Lines] can be set.
You can display vertical and horizontal grid lines, a 3:2 print area
guide, or both on the LCD monitor while shooting to help check the
position of your subject.
*2 Images are still recorded at the standard aspect ratio of 4:3.
3
Press the button.
1
Press the button.
• For or , each time that the button is pressed, the
settings are switched.
• For , the corresponding setup screen is displayed.
• Each press of the button records the white balance data
with the option. Since the frame does not appear at this
point, ensure that the white paper or cloth is positioned so it
appears at the center of the LCD monitor and then press the
button. After using this function once, the white balance
setting changes to the setting.
• For , pressing the button turns off the LCD monitor.
The display turns on again with any button operation.
Depending on the shooting mode or settings, this function may
not be available even if the
button is pressed.
Setting the Display Overlays
Shooting Mode
Off —
Grid Lines
Displays grid lines to divide the screen into 9 parts. Helps
confirm the vertical and horizontal positioning of the subject.
3:2 Guide
Helps confirm the print area for a 3:2 print.*
2
Areas outside the printable area are grayed out.
Both
Displays both the grid lines and the 3:2 guide
simultaneously.