Ip multicast, Polling frequency, Ppp options dialog box – Compatible Systems 5.4 User Manual

Page 177: Ppp o, Ptions, Ialog

Advertising
background image

Chapter 10 - WAN Link Protocols

171

IP Multicast

This is the IP multicast address. This address is the SMDS group address
assigned by the service provider and follows the E.164 format. The multicast
address must start with the letter E and be followed by at least 10 digits. The
missing digits will be filled in with F. The address should be entered exactly
as it is assigned by the service provider.

Polling Frequency

This number specifies the interval that the router uses to poll the SMDS
switch. The interval is specified in seconds and must be between 0 and 30.

If the switch does not respond to the polling, the router will eventually declare
the SMDS link down and start dropping packets designated for that interface.
A value of 0 will disable the polling mechanism. Disabling the polling mech-
anism will automatically declare the SMDS link up.

v Note: The keepalive mechanism is also referred to as "heartbeat
exchange" in SMDS literature.

PPP Options Dialog Box

PPP Options Dialog Box

You can access the PPP Options Dialog Box by selecting On Demand PPP
Link
or Dedicated PPP Link from the Link Type pulldown in the Link
Configuration: WAN Dialog Box (under WAN/Link Configuration), and
then clicking on the PPP Options button at the bottom of the dialog box.

Advertising