Remote control operation (dp-2060 only), Operating procedure, I loading batteries i – Kenwood DP-2060 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote control operation (DP-2060 only)
The operations of each are the same as those of the keys in the unit.
CHECK key
P.MODE key
EDIT key
REPEAT key
Search keys
I Loading batteries
I
Operating procedure
When twooperation keyson the remotecontrolunitarepressed successively,
press each key securely reserving an interval of more than 1 second for each
Notes;
.
.
. ■
..
.
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light
sensor. In such a case, change the system installation position to prevent the malfunction.
DP-2060/DP-1060 tEni
9