Dodge ham boob with full ce1\ter coixisdle – Kenwood CAW1035-01 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DODGE HAM BOOB
WITH FULL CE1\TER COiXiSDLE
Disconnect the negative battery terminal
to prevent an accidental short circuit.
If vehicle has floor shifter, remove shifter
knob,
I Unsnap and remove console front top
cover (closest to the dash}. (Figure A)
t Remove two 8 mm screws from under
consofe cover (previously removed).
Remove front section of console.
(Figure B)
5 Loosen two 8 mm screws at t>ottom of
dash. Unsnap lower panel.
6 Remove (2) Phillips screws facing up on
front edge of radio/climate control panel
(Figure D)
7 Unclip and remove entire panel surrounding
radio and climate controls, including a/c
vents. (Figure £)
8 Remove (4) 7MM screws securing radio
to dash and remove radio.
9 Continue to kit assembly.