How to use the bag clip, 0 fit the clip onto the headphone, Headphones with remote controller (dpc-441 only) – Kenwood DPC-341 User Manual
Page 10: Card remote control (dpc-441 only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[IM
Headphones with remote controller (DPC-441 only)
HOLD switch DSP key
How to use the bag clip
0 Fit the clip onto the headphone
Bag clip
-<D B.BOOST
(DLIVE
<DPOPS
® ROCK
(D FUSION
-<D OFF (Cancelled)
cord.
) Attach the clip to a pocket or
Card remote control (DPC-441 only)
When the card remote control unit is used, connect the AC adapter or car battery
adapter to the main unit. The card remote control unit cannot be used if the main unit is
powered from batteries.
Main unit
Skip/search keys
REPEAT key
P.MODE key
DSP key
\(BW/OOD
® C D ® ®
® © ® ®
© ©[[■fioQ
~ Numeric keys
Play/pause key
” Stop/powerOFFkey
VOLUME keys
After setting the VOLUIVIE
control of the main unit to the
maximum position, adjust the
listening volume with these
keys.
Operating range
Approx. 3 m
Remote control unit
The keys with the same names as the keys on the main unit function the same as the keys on the main unit.
LMwm ^......................................................................... ........ .---------------------------------------------------
• When pressing several operation keys on the remote control unit, leave an
interval of more than 1 second between keys.
• Erroneous operation may occur when the main unit is illuminated by direct
sunlight or the light of a high-frequency lighting (inverter) fluorescent lamp. In
such a case, change the unit position to prevent erroneous operation.
• For battery replacement, use a commercially-available lithium battery (CR2025).