Kenwood KRF-V8881 D - Manual (Page 22)

VR-2f390/VF!-S0BO/KRF-V8aB10/KRF.V77710 ¡En/Ki
if one of your connected components is not listed in the Setup Codes chart, its setup code can be downloaded through a
telephone line,
Futureset codes are stored in memory, Each time a "Eutureset Upgrade" is performed, any previous information in the Futureset
memory location is erased. Please inform your customer service representative if FutureSet has been previously used.
r« «itigrt«iirraawvac$!3r$^iZ=’':ieA»mr3!iairT¡isa"K* *fcE,,c3r_¿.
Write down the brand name and model number of your component in the space provided before
your call.
Type Brand Model Mo. Remote Model No.
TV KENWOOD KV-”?? RC-????
1
2
Type Brand j Model No. Remote Model No.
3
4 .......................
5 I
Call our Free-Phone Consumer Help-Line and explain which components you would like to add to
yo ur remote c ontrol.
USA: 1-800-753-9860 Caneda : 1-800-644-0073
This number is designed spedfrcaJly for "Futureset Upgrade",
questions about system operation should be first addressed to
your place of purchase.
• The hours for cutomer service in USA and Canada currently are
Mondsy-Thursday 9.00 am - 7:00 pm EST
Friday 9:00 am - 5:30 prn EST
Saturday 12:00 pm -4:00 pm EST
• After ouf customer service representative records the brand name
and model number of your component, he/she will ask you to hold the
remote to the speaker portion of your telephone as shown below.
Your remote coirtrol is KENWOOD model number: RC-R0907
Complete steps H, □ and 0 before holding the remote to the
speaker portion of your telephone.
Open the "Setup"menu.
O Select the "Main Menu" icon from the fixed segments.
© Select the "Stp" icon.
Perform icon selection in the "Setup ” menu.
©Select the "Download" icon.
Perform icon selection in the "Futureset Upgrade " menu.
№
..'Vie -i
.4. J »dfiiAsw jaafafcf*-
0 Select the "Download" icon.
• "Loading" is displayed during readout of the remote control
codes,
• The back light is turned off during "Loading",
• To abort downloeding in the middle, select the COWFIBM key lor
more than 2 seconds. As "Canceled" appears after abortion,
select the " Q " ¡con to exit the operation.
Receive the setup codes through the telephone.
O Place the receiver speaker of the telephone set on the coil
section of the remote control (as shown in the illustration on
the left).
• For each setup code tha operator can supply a setup code number,
Shouid you ever need to change your input configuration, this
number can be used. Please record for your future reference.
• After reception, the "Loading" message changes to the "Done"
message, which is shown for a few seconds.