Kenwood KRF-V8881 D - Manual (Page 63)

VH-209a/VR-3n80/KRF-V8881 D/KRF-V7771D (En/K)
Playback of digital input / playback of analog input
Switch the input setup of the recerverto "Input Digital" or "input Analog" according to whether the input signal from the source
component is digital or analog.
Input Sound Status
Input Si9nai
PCM
Auto
To play a digital input
Select the "Input Digital" icon in the fixed segments to play a
digital input.
o Select the "Input Digital" icon,
• Foi "Auto" and "Manual" of "Input Digital", see the desctip
tfon on the previous page
• Tii8 type of the signs! being played (PCM, etc.I is shown In the
"Input Signal” display.
Input Sound Status
Input Signal
Analog
To play an analog input
Select the "Irtput Analog" icon in the fixed segments to play an
analog input.
O Seiect the "Input Analog" icon,
• "Analog" IS shown in the "Input Signal" display.
Checking the surround alav status
The surround mode and input signal used in the current playback session can be displayed.
Select the "Main Menu" icon.
I I® ^ ^
m m m ee $3 q q
Lstn Mode fSnciiFncfstplE
©Select the "Lsn" icon from the "Main Menu" screen to
display the "Lstn Mode" menu screen.
Perform operation in the “Lstn Mode"menu screen.
Lstn Mode
[ DTS .......................If...... PSP
[□□ Digital If....................Stereo
Pro L-ogi^l^^status^
[□□ 3 SterecTil *
I The surround mode in use can be shown in the "Lstn Mode"
menu screen.
© Select the "Status" icon.
• Selecting the "Status" icon displays the "Input Sound Status"
menu screen.
Display in the "Input Sound Status" menu screen.
Input Sound Status
Input Signal
Dolby Digital!
• The "Input Sound Status" menu screen shows the signal being
played.
* During Dolby Digital (AC-3) playback, the input signals from the source
component are shown using icons such as "L", "C" and "R".
Auto
m