Jeep wraixisler g007, Modifications to radio cavity required) – Kenwood CAW1035-06 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
JEEP WRAIXISLER g007
(Modifications To Radio Cavity Required)
A
1
Disconnect the negative battery ter
minal to prevent an accidental short
circuit
2
Unclip and remove the lower center
trim below a/c controls. (Figure A)
3
Remove (2) Phillips screws exposed
behind lower center panel. (Figure A)
4
Undip and remove the upper center
trim starting towards the rear of the
panel. (RgureA)
5 Remove (2) Phillips screws exposed
behind upper center panel. (Rgure A)
6 Undip and remove entire panel sur
rounding radio and climate controls,
including a/c vents.
7 Remove (4) 7MM screws securing
radio. Unplug and remove radio.
(Rgure B)
Of
j l /
B
Continue to kit assembly.