Kenwood KRC-601 - Manual (Page 4)

Safety precautions
CD
CO
(D
О
Ч—
(D
CD
NOTE
If you have difficulty in installing this unit
in your vehicle, contact your Kenwood
dealer.
If it doesn't seem to be working
properly, first press the Reset button.
If the malfunction persists, consult your
Kenwood dealer.
Reset button
Cleaning the unit
* If the front panel is dirty, wipe it clean
with a silicon cloth or soft dry cloth with
the power off.
ACAUTION
Do not use hard cloths or paint thinner,
alcohol, or other volatile solvents. These
may damage external surfaces or
remove indicator.characters.
Cleaning the faceplate terminal
• If the faceplate terminal or mount
faceplate terminal becomes dirty, wipe it
clean with a soft dry cloth.
Cleaning the tape head
• As you play tapes for a long time,
magnetic dust and other grime
- accumulates around the heads and
eventually causes noise that lowers
sound quality. To clean the heads, use a
cleaning tape or cleaning kit. Make sure
you purchase a cleaning tape or cleaning
kit suited to car audio use.
Be careful with your tapes.
• Before loading a cassette, take up any
slack tape, by turning one of the spools
with a pencil. Loading a slack tape can
cause tape to tangle around the capstan
and pinch roller and other problems,
• Do not use any deformed .cassettes or
cassettes with labels coming off, or the
unit may fail.
• Do not leave cassettes exposed to high
heat (for example, on the dashboard
where it is exposed _Lo direct sunlight, or
near heater outlets). This can deform
the cassette shell.
• Avoid long cassettes, such as 120-
minute tapes. The tape is thin and
easily tangled around the pinch roller or
other parts.
• If you do not listen to your tape, remove,
it from the unit and store it safely. If a
cassette is I.eftin for a long time, the
tape can stick to the tape head, causing
failure.
4 English