3 optional fm-430 installation – Kenwood TS-430S User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTION OF FM-430 CONNECTIORS
6.3 OPTIONAL FM-430 INSTALLATION
1. Remove the transceiver top covers and unplug
the speaker lead.
2. Mount the FM-430 on the top right side of the trans
ceiver with 6 screws.
3. Connect the FM-430 harness to the transceiver as fol
lows:
*
Connect the leads from connector (1) to connector
(19) of the Switch unit (X41 -1470-00).
*
Connect the leads from connector (3) to connector
(24) of the IF unit (X48-1370-00).
* Arrange the leads from connectors (2) and (4) on the
bottom of the transceiver to pass along the side of the
Switch unit. Connect the leads from connector (2) to
connector (20) of the RF unit (X44-1510-00). Con
nect the leads from connector (4) to connector (6) of
the RF unit.
4. Tie the leads as illustrated using the supplied vinyl ties.
5. Reinstall the bottom cover, reconnect the speaker lead,
and reinstall the top cover.
FM-430
connector No.
Unit and TS-430 connector No.
(1)
Switch unit (X41 -1470-00)....................... 19
(2)
RF unit (X44-1 510-00).............................20
(3)
IF unit (X48-1370-00)............................... 24
(4)
RF unit (X44-1 510-00)............................. 6
TS-430 top view
Switch unit
TS-430 bottom view
Fig. 6-5 FM-430 Installation
2 1