Uniden UBC220XLT - Manual (Page 11)

11. NUMERIC KEYPAD — Use these keys to program a
channel for scanning. Also use to access a channel
directly with During SCAN Mode, use these keys to
select or deselect any of the 10 memory banks. (Only
the selected bank indicator(s) appear on the display.)
Note: You cannot d&activate all 10 banks at the
same time.
Key Bank Channel
®
1 1 *20
2 21 -40
3 41 - 60
4 61 -80
5 81 - 100
®
6 101 -120
®
7 121 -140
® 8 141 -160
® 9 161 -180
®
10 181-200
Press to store a displayed or entered frequency
Into any displayed channel.
13. Press SRCH
I
to start a search within frequency limits
specified by you.
14. In SEARCH Mode, press (^) to stop searching.
When Search is stopped, use A to go up in frequency.
In SCAN HOLD Mode, use this key to go up to
the next channel.
15. Press ( UP ) to “Lock Out” or prevent scanning of the
displayed channel, including Priority Channels. (L/0
appears on the display.) To unlock a channel, press
( UQ^) again, ( Lt) ) can be used in Scan or SEARCH
Modes.
16. Use (
datj
^ to skip data signals and unmodulated earners
when in SEARCH Mode. This feature is not active in the
Air Band.