Kenwood TH-26A User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Select
the
first
digit
by
rotating the Tuning control.
3. Press the SHIFT key. The first
digit
is
registered
and
the
second digit begins to flash.
4.
Select the second digit by
rotating the Tuning control.
5.
Press
the
SHIFT
key.
The
second
digit
is
registered
and the third digit begins to
flash.
6.
Select
the
third
digit
by
rotating the Tuning control.
7.
Press the SHIFT key and the
complete
DTSS
code
is
registered.
The
mode
returns
to the previous one.
SHIFT
Notes
1. If a key other than the SHIFT key is pressed dur
ing operation, code selection mode is canceled.
2. If no action is taken for longer than 10 seconds,
code selection mode is automatically cancelled.
OSelecting using memory channels 1 through 3
1. Follow steps 1 through 7 above In the VFO mode.
2. Store the selected code in memory.
Follow steps 1 through 7 in memory mode to edit a
stored code.
• Selecting and storing a code with the DTMF KEY PAD
(DTP-1)
A DTSS code can be selected and stored as follows when
the DTMF KEY PAD (option) is operational.
1.
Press the F key for longer than 1 second. Press the
SHIFT key while the F indicator is flashing (for 10
seconds).
2. Then enter a three-digit number on the key pad.
• Using the DTSS function
1. Adjust the SQL control to the
threshold point.
2.
Press the F key. Press the
SHIF
key
while
the
F
indicator
is
flashing
(for
10
seconds).
The
DTSS
indicator
begins to light.
3.
Squelch will open when the
proper code is received.
4.
When
the
PTT
switch
is
pressed, the code shown in
0
SHIFT
40