Position your surround speakers, Setting up – Bose Home Theater Speakers V-100 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up
Figure 4
Alternate choices for
placing the surround
speakers
Position your surround speakers
Surround speakers In the V-300'” speaker set provide
surround sound effects from the rear of your vie\wing area
(Figure 4).
Brackets that come with these speakers allow you to mount
them on the wall or ceiling. If you use the supplied brackets,
refer to the bracket Instructions in the Appendix. Do not
connect the speakers before reading those Instructions.
If you prefer, set the speakers on a table or shelf in a horizon
tal or vertical position.
For accurate surround sound:
•
Place these speakers behind the general viewing area,
along the rear wall or to the rear of side walls.
•
Make sure they are at least 2 feet (.6 m) from your video
screen.
•
Place both speakers at the same height.
•
Place the speakers as far apart as your room allows.
•
To mount the speakers on brackets, be sure to leave
room to tighten the bracket screw.
•
To stand the speakers horizontally or vertically, apply the
rubber feet to their bottom surface (Figure 5).
CAUTION:
Do not place the
surround speakers
within two feet of your
video screen. They
are not magnetically
shielded and will cause
serious video interii
ence if placed too
to the screen.
CAUTION:
The bracket screw must
be inserted from the
bottom on a vertically
mounted bracket.
Self-adhesive feet
Figure 5
Self-adhesive feet on the
bottom of a surround
speaker in horizontal or
vertical position