Kenwood KDC-DAB43U - Manual

Determining the antenna instaiiation iocation
. « where the earth sheet of the Amplifier ©can be stuck on the metal part of the front pillar.
Antenna instaiiation
1 Check the installation location.
2 Wipe the area where antenna film ©,
amplifier unit©, and earth sheet is to be
placed with the included cleaner ®.
■ The paint work on the metal surface need
not be removed
■ Ensure that the glass surface is completely
dry before mounting element
^ If the glass is cold to ensure good adhesion
warm the glass with the cars windscreen
heater
Remove the backing (tag I) of antenna
film © horizontally and stick the
antenna on the front glass.
5 After sticking, rub the element on the
windscreen in the direction of the arrow
shown in the figure to bond it & remove
bubbles.
I
■ Remove the backing gently
■ Do not touch the sticky side of the
antenna film
4 Remove the backing (tag II) of antenna
film © vertically and stick the antenna
gently while applying pressure.
6 Remove the backing film (tag III).
■ Do not touch the feeder terminal of the
element. Also, do not apply any glass
cleaner.
Feeder terminal