Kenwood TM-255E - Manual (Page 20)

3 MENU SETUP
MENU DESCRIPTION
Many functions on this transceiver are selected or
configured via software-controlled menus instead of
physical controls on the transceiver. Once familiar
with the Menu system, you will appreciate the
versatility it offers. No longer is the number and
complexity of features restricted by the physical size
of transceiver.
The Menus are identified as Menu A and Menu B.
Menu A is used to access functions that are frequently
changed while Menu B is used for less frequently
changed functions.
MENU ACCESS
Anytime that you wish to change a function that is
controlled by Menu Setup, use the following
procedure:
1 Press [F] (2 s) or microphone [PF] to enter Menu
Setup.
2 Select Menu A or Menu B by pressing [A/B] or
microphone [VFO].
• The last menu number used and the current
menu selection appear.
3 Select the desired menu number by turning the
Alternate Tuning control.
4 Select the desired menu selection by pressing
[F.LOCK], or [LOW], or microphone [UP] or
[OWN].
• When selecting from a group of numeric menu
selections, [F.LOCK] or microphone [UP]
selects in ascending order, and [LOV\^ or
microphone [DWN] selects in descending
order.
5 After selecting the desired menu selection, press
[F], or [CLR], or microphone [PF] to exit Menu
Setup.
Note:
♦
Accessing menus while the Frequency Lock function is ON
cancels Frequency Lock temporarily. Frequency Lock is
restored after exiting Menu Setup.
♦ The Automatic Power Off timer stops counting while you are in
Menu Setup.
MENU CONFIGURATION
Refer to the following tables when configuring Menu A or Menu B.
MENU A
IMemi No. Do$criptid|i Selections 1 Default Page
00 Display Brightness
• 4 Illumination levels and OFF (d1: brightest)
OFF/d4/d3/ d2/d1 d2 39
01 CW Keying Delay
• Delay time in milliseconds 100/ 200/ 300/ 400/ 600/ 800/
1000/1400/1800 ms^
600 ms 23
02 CW Receive Pitch
• 50 Hz steps 400 to 1000 Hz 800 Hz 23
03 Busy-Frequency Stop (Program Scan)
• Enabled (ON) or Inhibited (OFF)
ON/OFF ON 29
04 Scan Resume (Program Scan)
• Time-operated (0) or Carrier-operated (1) 0/1 0 29
05 Memory Scan
• All Memory channels (ON) or specific channel group
only (OFF)
ON/ OFF OFF 30
06 SSB/CW Frequency Step Size
• Alternate Tuning control or microphone
[UP]/[DWN]
• 5 step sizes
10 Hz/100 Hz/1 kHz/5 kHz/
10 kHz
10 kHz 17
07 FM Frequency Step Size
• Alternate Tuning control or microphone
[UP]/[DWN]
• 8 step sizes
10 Hz/100 Hz/1 kHz/5 kHz/
10 kHz/12.5 kHz/ 20 kHz/ 25 kHz
TM-255:
12.5 kHz 2
TM-455:
25 kHz
17
08 AF Level Select
• Low (L) or High (H) L/H H 16, 38
^ TM-455; Full Break-in ("Full") can be selected but this function is not supported.
^ U.S.A. and Canada: 5 kHz
13