Uniden UH054A User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press and hold
A on the chan button to
adjust the "squelch gate" so high that no
signals get through.
51-1
5. Press and hold
T on the chan button to
adjust the “squelch gate” so everything gets
through - noise, weak signals, and strong
signals.
5L
Strops Signals-
Medium Signals-'
WeakStgnata-
6, To set the
“squelch gate” to the
desired level, press
A on the chan
button until the gate
is all the way shut.
Strong Signals
Medium Signals
Weak Signals
Noise-----------
Press
T repeatedly until you just hear
noise. Then press
A on the ciian button
repeatedly until the noise just stops. Now
only strong signals get through.
51. =
strore Signal»-
Press the squelch button when finished.