I“» = > ) – Uniden UH054A User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
♦ start memory
scanning (as de
scribed on the pre
vious section) then
momentarily press
the priority button.
- or -
♦ While dual watch
ing, press the scan
button.
Deleting and Sforin^ Channels in the Scan
Memory
You may have certain channels that you do not
want to hear every time you scan. These are
channels that are busy in a major portion of
time, and the scanning stops at that channel(s)
often enough to interrupt the scan cycle. You
can remove those channels from the scan
memory so that they are not scanned.
1. Using A or ▼ button
manually select the
unwanted channel.
2. Then press and hold
the mem button.
You will hear a two-
confirmation tone
and MEM icon
disappears from the
display.
1"»
I t
To return the deleted channel in the scan
memory.
1. Using A or ▼ button
manually select the
desired channel.
I“» =
> ) =
15