Kenwood BJV140Z - Manual (Page 25)

(iL~
Recording-reiated keys
\ ; X
jsten a.sD av
—x '
25
\\ i ""V
-<ste:j \'p: ;.e aiso'av
■■'' iV
:J
aisD-av
• ••■' ovEH.
ae
\\ i//
\ o > . ^ s : q q va ja c soia\
1
'"/'I'S.""
When "AUTO TiME?" is displayed
{Valid during analog recording)
Pressing the SET key while "AUTO TIME?" is displayed initiates
the initial display for the no-sound blank detection time adjust­
ment for automatic track number marking.
The time after which a no-sound blank is detected can be varied by
operating the skip up/down keys.
The initial setting is "TIME ♦ 2.0 SEC", which can beset in the time
range between 0.5 and 4.0 seconds set in 0.5-second steps.
When "AUTO LEVEL?" is displayed
(Valid during analog recording)
Pressing the SET key while "AUTO LEVEL?" is displayed initiates
the initial display for the no-sound blank detection level adjust­
ment for automatic track number marking.
The level at which no sound blank is detected can be varied by
operating the skip up/down keys.
The initial setting is "LEVEL * 0", which can be set in the level
range between +2 and - 2 .
When "REC WRITING?" is displayed
"WRITING" refers to the writing of recording-related data in the
Mini Disc.
Pressing the SET key while "REC —*■ WRITING?" is displayed
initiates the initial display for the writing mode setting.
The UTOC writing after recording can be switched on/off by
operating the skip up/down keys.
The initial setting is "WRITING * ON".
Setting examples
WRITING ON ; Use this setting in normal recording (from a CD,
etc.).
WRITING OFF : At this setting, recording can be started immedi­
ately as the WRITING mode will not be entered.
Use when recording a short track or a broadcast
from the tuner.