I locking the sim to the handphone, Q enter a new pin, pin2, or handset ^ code, Press [ok – Kenwood EM 618 User Manual
Page 12: Enter pin, pin2, or the handset code ogoin, Enter the handset code
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q Enter a new PIN, PIN2, or Handset
^ code.
*0K* wi appMr aft*r you enter 4 digits
3
Press [OK].
*Re*errter New PIN*. 'Re-enter New PIN2*.
ck
'Re-enter New
Handset Code* wilt appear.
Enter PIN, PIN2, or the Handset code
ogoin.
we appear attar you enter 4 ogttB
3
Re*enter New PIN
/1 Press [OK].
'PIN Changed*. *PIN2 Changed*, or 'Handsel Code
Changed* wlH apfMar.
I Locking the SIM to the Handphone
When ’Lock SIM to Ph<K>e* is enabled, you must enter the HarKlset code each time a new SIM is
installed (including the onginal SIM).
Press [Menu].
2^^ Press or C3> until "Change Security
Settings" oppeors.
2 Press [Select], then press or dP
until "Lock SIM to Pnone" oppeors with
the current stotus.
Press [Enable] or [Disoble] to change
the status.
'Enter Handset Code* will appear
Enter the Handset code.
T.^1
Lock SIM to '
Phone
Disabled'
V.____
wM appear aner you enter 4 dkjibi
72
^ Press [OK].
*SIM lock to phone has been disablecr or 'SIM lock to photw
has been ertabled* will appear