Kenwood EM 618 - Manual (Page 9)

Security Features
Security features protect your phor>e from unauthorized use and misuse, and limits the type of calls
that can be made trom your pt^e according to your needs
This phone provides the following security features:
• Locking the keypad SO that keys cannot be pressed accidantalty.
• Locking your handphone so that K cannot be used unless the PIN is entered at power>up.
• Locking the SIM to the handphone so that rt canrK>l be used unless the Handsel Code Is entered
when a r>ew SIM Is Instaned
• Barring outgoirtg and incoming voice calls, data calls. arKf fax calls.
• RsstncUng outgoing calls except from the Fixed Number Dialing Met.
• Resiricimg outgoing calls except from the Phonebook
• Restncting outgoing calls except from the Speed Otailmg list
Locking the Handphone
Your phone has a single 4*digit secunty code called the Handset code. The SIM card has two
security codes called PIN and PIN2. The phone can be configured to request input of PIN andfor the
Handset code when the phone Is switched on. The Handset code is onty requested the first time a
new SIM is installed
'Cancelling a Blocked Code
II you enter an incorrect PIN 3 tirrMs in succession. *PIN blocked“ wiH appear. To cancel the block:
1 Enter the PUK at the "Enter PUK"
prompt/ then press [OK].
wW ofow •fl«'you »hlafr a digit
“Enter New PIN* win appear
2 Enter a new PIN, then press [OK].
----------------------------- — ~ ~ ---------- —s
PIN can be between 4 and e (HgitB
“Re-enter New PIN* will appear.
^ Enter the PIN again/ then press [OK].
*OK* wü appear after you erder 4 digits
“PIN Changed’ will ar^jear.
M you enter an mcorrect PUK more than 10 times. “PUK
blocked Contact Service Provider* will appear. The SIM card
is now blocked- Please contact your service provider.
69