Ac adaptor/charger, Ac/dc adaptor/charger – Uniden UBC60XLT User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AC Adaptor/Charger
Use the optional AC
Adaptor/Charger to power
the UBC60XLT from an
AC source.
The AC Adaptor/
Charger also recharges
Nickel-Cadmium
Batteries while they are
installed in the scanner.
WARNING! Do not charge Alkaline Batteries in this
scanner. Doing so may cause serious
damage to toe product
and void the wananty. Before attempting to recharge
Batteries, make sure yrou have installed four rechargeable
Nickel-Cadmium
Saffenes and the selector switch is set to
“Ni-Crf.
Mounting the Flexible Antenna
Installing the Belt Clip
CAUTION: Do not tighten
the screws too tight. You
could damage the case or
clip.