Operation check, Service call check – Kenwood SA 600 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operation Check

Procedure for checking the cooker.

1. Plug into an electric power point.

2. Place turntable inside the oven cavity.
3. Place on cup of water at room temperature inside the oven, on the turntable.

4. Close door securely.
5. Set the timer to three minutes and press the ‘COOK’ lever for cooking. The cooking

indicator will light and the turntable will revolve.

6. After three minutes the pinger will sound and the cooker will turn off.

7. The water should be boiling if operating normally.

When the door is opened during the cooking process, the timer automatically stops. The timer
starts again when the door is closed and the COOK lever is pressed again.
When the door is opened or the timer is set, the oven light operates. Therefore, if you wish

to keep the oven in the ‘off’ position then close the door and set the timer to the ‘0’ position.

DO NOT OPERATE THE COOKER EMPTY

Service Call Check

Please check the following before calling for service:

1

.

2

.

Open the door and/or set the timer.

(a) Does the oven light operate

YES__

(b) If “NO”, pleasecheckyourwallsocketandfuse.
Place a cup of water on the turntable and close the door securely.
Set the timer for three minutes, and press the “COOK” lever.
(a) Does the cooking indicator light go on?

YES

(b) Check to see if the turntable moves

YES

(c) Does the cooling fan work?

YES__

. NO_

NO_
NO_

_NO_

IF SERVICE IS NEEDED, PLEASE CONTACT YOUR NEAREST KENWOOD FOR
KITCHENS LIMITED SERVICE DEPOT.

Advertising