9*3. paging transmission (calling) – Kenwood TH-27A User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For example, the following groups communicate
with each other.
Predetermined frequency 145.660MHz
Group code
Member 1
Member 2
Member 3
Member 4
789
Individual Code 111
Individual Code 222
Individual Code 333
Individual Code 444
Member 2
A
222
2
789
0
Member 3
A 333
3 789
0
Member 4
A 444
4 789
0
4-9*3. Paging Transmission (Calling)
Your station ID code is preset in memory A. (The local
station ID code is always stored in memory A.)
1. Tune to the predetermined frequency.
2. Press the F key, then press the DTSS/PAG key to enter
the PAGING MODE.
The paging function of the other transceiver must be ON, too.
3. Press the ENT key to enterthe CODE SETTING MODE.
4. Use the tuning control to select the memory channel
in which the local station code is stored.
PAG
DTSS
37