Toshiba MA-132 SERIES - Manual (Page 14)

This key is used to correct a numeric entry error if prior to
depressing any other function key, or to correct any error condition
and cancel an alarm buzzer.
If this key is depressed before depressing the Department Key or j PLU j
in a quantity extension sequence, all of the quantity entry, the {X|
key depression, and the unit price entry are all cleared at a time.
If the [^1 key is depressed after a sub-total is obtained, the sub­
total is then displayed.
The r^i key may be operated regardless of the Control Lock positions
except "LOCK".
CLEAR KEY
#/NS
NON-ADD NUMBER PRINT / NO-SALE KEY
This key has both functions of [J] ^nd
I
NSl keys that have already
been described on page 8 and page 6 respectively. It functions as
Non-add Number Print Key with a prior numeric entry, or as No-sale
Key without a prior numeric entry. If this key is installed, the
and the [N^ keys must be eliminated from the keyboard.
LC
OPEN
LISTING CAPACITY OPEN KEY (optional key)
This key is used to release the listing capacity preset on each Depart­
ment key temporarily. To operate, depress this key before depressing
the department key (either before or after the numeric entry).
| 7 | 8 | 9 l
|9|5|6|
|1|2|3|
lolool - I
By depressing the |LC OPEN
to allow a numeric entry with two further digits.
key, the listing capacity will be released
Repeat operations
will be possible on a department
used before the department key.
key even when the jLC OPEN 1 key is
NUMERIC KEYS
These are used to enter numeric
non-add number.
values such as amount, quant ity, and
Depressing the 100*1 key once is
twice consecutively.
the same as depressing the E] key
The [7] key is used to enter the decimal
rate containing decimal portion. The [7]
point of a manua1
key cannot be used
perc
for
ent
any
other purpose.
The maximum listing capacity for sale item amount through a department
or PLU is 7 digits. If a listing capacity is programmed for a depart­
ment, any amount entry exceeding the listing capacity will result in
an error.
The maximum listing capacity for a non-add number or amount tendering
is 8 digits.
- 10 -