For programming keyboards – Toshiba TEC EMl-31015D User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EM1-31015D
For Programming Keyboards
Key
Function
LO
tn
o
0.
<V
«
I
oc
CLEAR
This key allows the clearing of numeric entries prior to the depression
of another function key. It is also used to release the scale from the
error mode.
O
o
o
SHIFT
This key is used to select the upper or lower character indicated on
the keytop when setting the commodity name or store address.
O
o
While this key is pressed down, press a character key to set the small
letter of alphabet, or upper-case character indicated on the upper
area of the keytop. When this key is released, the shifted status is
cancelled.
O
SET
NEX
This key is used to recall the next PLU # ( + 1 ) of the PLU # currently
recalled.
o
o
NEXT
PLU
This key is used to recall the PLU # which is registered next to the
current recalled PLU #. It is also used to skip the digit when setting
the bar code format.
o
o
o
AUTO
CODE
This key is used to set the auto code for UPC #.
o
o
o
SEND
RECEIVE
These keys are not used. (No function)
o
o
o
CHANGE
PLU
This key is used to change the PLU # currently recalled.
o
o
o
DELETE
PLU
When a PLU is no longer to be maintained in the PLU file, this key is
used to delete such PLU data.
o
o
o
TEST
This key is used to print out the data set in the currently recalled
PLU.
o
o
o
PROG.
This key is used to access each programming menu.
o
o
o
o
This key is used to select selectable items.
o
During programming, data is input to the SL-5900 system using this
key.
o
o
ENTER
O
o
o
This key is used to set the free zone of the auto code for UPC #,
back the digit when setting the bar code format, and return the setting
line to the first line while setting the second line and during the setting
of the commodily name or store address.
o
o
o
12