Control lock – Toshiba TEC EMl-31015D User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EM1-31015D
The control lock has seven marked positions.
There are two control keys which will operate these locks.
Each of the following positions on the control lock serves a different function.
Position
Function
PROG. CMT.
This position is used to set the data of the PLL), store address, printing
position, date, time, bar code format, etc. It is also used to transfer the
PLU file using a CMT loader.
REG.
This position is the normal control lock position which allow the issuance
of printed labels.
OFF
This position is used to lock the scale power.
M. DOWN
This position is used to designate an item for discount pricing.
REWRAP
This position is used to designate an item for rewrapping products.
X(Read)
This position is used to read all the accumulated sales totals stored in
the total memory.
Z (Reset)
This position is used to reset all item file totals.
14 -