JVC LVT1089-001B - Manual (Page 5)

CONNECTIONS
• Do not switch the power on until all the connections are com­
pleted.
• Insert the plugs firmly, or poor contact will result, causing
noise.
• When the pin-plug cords are employed, always connect the
white plug to the left channel terminal. This helps to avoid
reversed connections.
• When using the Сотри Link Control System version 3, do not
connect the power cord to the SWITCHED AC OUTLET of an
amplifier or receiver.
1. Connection to a stereo amplifier
Note:
When installing the deck, be sure to install at a distance from
your amplifier. If they are stacked, noise (hum) may occur.
2. Remote cable connection for COMPU LINK
• By connecting a remote cable, COMPU LINK functions (auto­
matic power on/STANDBY, automatic source selection,
synchronized recording and DDRP recording) can be per­
formed. In this time the provided pin-plug cords must be also
connected.
• When making synchronized recording with a CD player, con­
nect the remote cable to the COMPU LINK- 3 /SYNCHRO
jacks.
Notes:
1 . When making synchronized recordings, only a single deck
should be connected to the amplifier.
2 . If a component is not a JVC COMPU LINK component,
bypass it when making the remote cable connections.
3. This deck can be connected with an amplifier and a CD
player which have the COMPU LINK- 1 /SYNCHRO jacks for
COMPU LINK performance. (See page 7 for details.)
CASSETTE LOADING
1 . Press the ± (eject) button to open the cassette holder.
2. Load a cassette as shown.
3. Press the cassette holder to close it. Be sure to obtain the
click sound to close the holder securely.
- 3 -