Toshiba TEC EMl-31055 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EMI-31055
6. CONTROL LOCK
The control lock has seven marked positions.
There are two control keys which will operate these locks.
• Manager Key
This key (MA) will access the
PROG/CMT, REG, M, DOWN,
and REWRAP positions.
• SE Key
This key (SE) will access al
seven positions.
Each of the following positions on the control lock serves a different function.
PROG. CMT. --------- With the manager key in this position, it is possible to program data in the PLU
file. Store Address, Message, Printing Position, Date, Time, Initial Set, and Bar
Code Format, etc., may also be programmed.
REG.
M. DOWN
REWRAP
X(Read)
Z (Reset)
These positions are the normal control lock positions which allow the issuance
of printed labels.
In the Markdown position, it is possible to designate an item for discount pricing.
In the Rewrap position, it is possible to designate an item for rewrapping products.
This position is used to read all the accumulated sales totals stored in the unit.
These totals include individual item totals, group totals, hourly totals, and the entire
file totals.
■
This position is used to reset all item file totals.
- 7