Toshiba TEC MA-227-100 - Manual (Page 12)

EOl-11004
OFF
RECEIPT ON/OFF SWITCH ([RECEIPT ON/OFF])
This switch two positions available; the ‘OFF’ position and ‘ON’ position.
When in the ‘OFF’ position, no receipt is issued from the register and sales are
printed on the journal roll only. When the switch is set to the ‘ON’ position,
sales are printed on both receipt roll and journal roll, then a receipt is issued
which is given to the customer.
RECEIPT
ISSUE
RECEIPT POST-ISSUE KEY ([RECEIPT ISSUE])
This key is used to issue the receipt of a sale when the sale has already been
finalized with the [RECEIPT ON/OFF] switch positioned to OFF.
However, the post-receipt can be issued even when the [RECEIPT ON/OFF]
switch is positioned to ON if so programmed in system option.
This key will not function if another sale is already under way.
The post-receipt may be an itemized receipt (i.e. all sale items and the total are
printed, just as for an ordinary receipt) or a total-only receipt according to a
program option selection.
POST-RECEIPT PRINT FORMAT:
r— Itemized Print
Option: Itemized Receipt —
Option: Total-only Receipt
when the sale contains
not more than 20 items.
Total-only Print
Total Print
when the sale contains
more than 20 items.
regardless of the number
of items in the sale.
RF
RECEIPT FEED KEY ([RF])
This key is used to advance the receipt roll. It is operated by depressing the
key and holding it in that position until the paper has advanced to the required
position. This key is effective even when the [RECEIPT ON/OFF] switch is in
the ‘OFF’ position.
JF
JOURNAL FEED KEY ([JF])
This key is used to advance the journal roll in the same fashion as the [RF]
key. These keys are useful if the operator, due perhaps to an interruption
while ringing up a sale, is unsure which items have already been entered. By
using the feed key the operator can see which figures have actually been
printed.
The [RF] and [JF] keys cannot be operated simultaneously.
-9-