Toshiba TEC EM1-31059 - Manual (Page 111)

EM1-31059
US/CA type : Page 7-19
■ PL-3 Operation
Connect the PL-3 to the SL-6600 by using RS-232C Cable, then on turn the power of the SL-6600
and the PL-3.
Insert a data disc into the PL-3 and adjust the transmission rate to the SL-6600 ( 1 7 1 2 |: 4800 BPS
or I 7 13 |: 2400 BPSt by using the rotary SW.
Press the | SAVE key of the PL-3, then check whether the SAVE LED is on.
Program the file number of the data disc by using the rotary switch. 3ora
Oi : File No. 1, File No. 2, 4 8 : File No. 8, | 4 | 9 | : File No. 9)
Select programming
menu #5.
Old format PLU/ING Data Verify
(SL-6600 » CMT = SL66/6600/5900)
Old format PLUflNG Data Load
(SL-6600 CMT «- SL66/6600/5900)
New format PLU Data Save
(SL-6600 -» CMT -► SL66/6600/5900)
New format PLU Data Verify
(SL-6600 = CMT - SL66/6600/5900)
New format PLU Data Load
(SL-6600 CMT ■>- SL66/6600/5900)
New format ING Data Save
(SL-6600 -* CMT -► SL66/6600/5900)
New format ING Data Verify
(SL-6600 = CMT = SL66/6600f5900)
New format ING Data Load
(SL-6600 CMT ♦- SL66/6600/5900)
Press either
SAVE or LOAD
key on the PL-3.
Press ENTER key
on the SL66.
(See NOTES: 1)
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
SAVE or
I
LOAD
ENTER
PROG
ICMT
p 5
ENTER THE NUMBER
P5
VERIFY PLU&ING.
P5 2
READ PLU&ING.
P5 3
WRITE PLU TO CMT
P5 4
VERIFY PLU=CMT
P5 5
READ PLU FM CMT
P5 6
WRITE ING. TO CMT
P5 7
VERIFY ING.
P5 8
READ ING. FM CMT
P5 9
SAVE
7 seg. display
LOAD/COMPARE
7 seg. display
7 seg. display
15-5