Toshiba TEC MA-1040-100 Series - Manual (Page 8)

single-item Department Keys
A Single-item Department Key is used to quicken a single cash sale
item entry process, instead of depressing an ordinary itemized
department key and [AT/TL] key. On depressing this key, the sale is
finalized and a receipt is issued. Any number of the department keys
installed on the keyboard may be programmed as Single-item Department
Keys.
Additional Department Keys
A maximum of 20 department keys (including the present department
keys) are available.
CLEAR KEY ([C])
This key is used to correct a numeric entry error or a declaration key
(such as [RTN MDSE]) entry error prior to depressing a motorized key
(such as [DEPT]) or to correct any error condition and cancel the
alarm tone.
If the [C] key is depressed after a subtotal is once obtained, the
subtotal amount is again displayed. If the sale total plus taxes is
once obtained by the [TXBL TL] key or the [ST] key with the "Taxable
Total Display" option, depressing the
[c]
key thereafter will display
the sale total plus taxes.
QUANTITY EXTENSION (MULTIPLICATION) KEY ([X])
This key is used to multiply a department or PLU item entry by a
quantity.
The basic order of multiplication is:
1
QUANTITY
I
[X] ^ ¡UNIT PRICE |
As for details of multiplcation for various cases, refer to the
"REGISTERING PROCEDURE FOR SALES" section in this manual.
The QUANTITY can be a maximum of 3 integral digits and 3 decimal
digits, and the UNIT PRICE may be a maximum of 6 digits. The product
must not exceed 7 digits. When a decimal portion is required for the
quantity, use the [.] key.
Usually, the fraction below the least significant digit will be
rounded off. However, it may be programmed to be discarded or rounded
up by the system option.
- 8 -