Toshiba TEC SL57 SERIES - Manual (Page 26)

12. PROGRAMMING PROCEDURES
[Mode SW.(1): BY COUNT (PROG.)]
[Mode SW.(2): X/Z PROG.]
In this chapter are described operations to add to or change the data already programmed in the
"PROG"mode. To enable the programming operations in the "BY COUNT (PROG.)" position of the Mode
SW.(1) and the "X/Z PROG." position of the Mode SW. (2).
12-1. Date and Time Setting
ex.) To set the date "July 25th. '87" and time "21:09":
Mode SW. (1): BY COUNT (PROG.).
Mode SW. (2): X/Z PROG.
(01'12) (01-31)
2 1 0 9 — PRT/*
Hour '-Minute
(00-23) (00-59)
NOTE: The SL57 will check details of date (time) input, any wrong date (time) will result in error mode,
and correct date (time) should be entered again.
12-2. Unit Price Presetting or Changing
ex.) To set $ 2.50 to Preset key Q, and $ 3.00 to Preset key Q:
Mode SW. (1): BY COUNT (PROG.)
Mode SW. (2): X/Z PROG.
PRT/-X- PRT/*
(Max. 4 dig.) (Max. 4 dig.)
12-3. Name or Message Programming
(Department Name, Clerk Name, Article Name, or Commercial Message etc.)
ex.) To program "Beef #1"for Department key Q .
Mode SW. (1): BY COUNT (PROG.)
Mode SW. (2): X/Z PROG.
(B) (e) (e)
Character code: 3 digits
(See Table 1)
(f)
2 0 0 — 2 0 3 — 3 0 1 PRT/* PRT/* —► The label is issued.
(Space) (#) (
1
)
NOTE: Up to 20 regular-sized characters (including spaces) can be programmed on one line.
- 23