Toshiba KV-7168A - Manual (Page 26)

Press the > SHIFT
button to blink end time.
Set end time to 17:00
with the SET button and
the > SHIFT button in
the same manner as 6.
DISPLAY
o
•yilhIthiCOtA
3bl CZ)
< iHiFlT
CD CT
-iffiVOK SELECT
FP.l ON
FR£ ON
SAl ON
SA2 ON
SUl ON
$02 ON
DLY ON
I20H
I20H
I20H
I20H
120H
I20H
I20H
MEMJ=[DTSPI AY]
HENU=[OISPLAY]
8 Press the > SHIFT
button and the + SET
button to set recording
time mode to A24H,
DISPLAY
CD
yTIMEKODEA.
^D SET
< shift '^T'
o o
a CD
■'pJ.riKI'-Ji:
^CD
.CC,ii"CN SE.ECT
FRl ON
FR2 ON
$A1 ON
$A£ ON
SUl ON
SU2 ON
OLY ON I20H
120H
-- -► - - r - - 120H
120H
- - - - - - i - - 12011
120H
120H
MENU-[0rSFLAY]
FRl ON
FR2 ON
SAl ON
S a 2 on
SUl ON
SU2 ON
DLY ON 30-H7
-- 120H
-- 12QH
-- 120H
-- 120H
-- 120H
-- 120H
30|IZOHl
menu =: d ] splay ]
The A TIME MODE button is pressed, the display
changes as follows.
120H ^ 168H ^ L01 ^ L02 ^ L03 ^ A2 ^ A6 A12
^ A18 ^ A24 ^ 24 ^ 48 ^ 72 ^ 120
The V TIME MODE button is pressed, the display
changes in the reverse direction.
----------- IF A POWER FAILURE SHOULD OCCUR------------------
If a power failure occurs, the PW.FAIL display appears
in the VCR display. To erase this display press one of
the operations buttons.
It the power failure is recovered within 10 days, and the
battery is charged continuously for more than 48 hours
in the ambient temperature, the date/time data and
timer recording programs remain in the memory.
Press the TIMER button.
FRl ON 12GU
I f 1
FR2 ON . _.---- 120H J. \J
$A1 ON IZOH oHl H
SAZ ON : IZOH TIMER |REC| p n 1 /
SUl ON IZOH
'■ J
!c' : J T TWFR M 1
GUZ ON - IZOH
DLY ON 8:30-»[ni:30 IZOH T
The power goes off and the TIMER display lights in the
VCR display.
Recording starts at the programmed start time.
Notes: ---------------------------------------------------------------
■ If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.
■ To cancel the timer recording, press the POWER button or
the TIMER button.
■ The time difference between start time and end time
should be more than 1 minute. If they are same, timer
recording doesn’t work.
■ The accuracy of the time display depends on the condi­
tions of use and the environment. Set clock to the exact
time by daily check.
■ During timer power off mode, alarm recording will not
operate at all.
During the 12 hour display, the display appears as follows.
—
■ • PROCIIAM • ■
FRl ON : — ■+ -: --- IZOH
l-R?ON
.--- ^ .
--- IZOH
SAl ON . — ^ : --- IZOH
SAZON . — ^ : --- IZOH
SUl ON :------► -:--- IZOH
SU2ON .------► -:--- IZOH
DLYON .----^ : --- IZOH
^ENU- [DISPLAY]
26