Registering during power failure, Examining sales total during business hour (read), Resetting of sales – Toshiba MA-120 Series User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. REGISTERING DURING POWER FAILURE
In the event of power-loss, the memory is protected for nearly one hour.
The interrupted entry of a transaction can be continued after the return of power.
8. EXAMINING SALES TOTAL DURING BUSINESS HOUR (READ)
O Set the total control lock to the position of "X” with O p key.
O Depress I
at
/TL| key.
O Total of various sales is printed together with the symbol of “X” and receipt is issued. In addition, the
same printing is also made on the journal paper and the drawer is released.
O Since this operation is the read operation, the total sales amount is kept in the memory of the register and
succeeding registrations are added.
9.
RESETTING OF SALES
When business is over, reset sales total accumulated.
O
Set the total control lock to the position of “Z” with M Akey.
O Depress
AT/TLj key.
O Total of various sales is printed together with the symbol of “Z” and receipt is issued. In addition, the
same detail is also made on the journal paper and the drawer is released.
O
When the reset operation is over, the total amount registered in this register is cleared to “0”.
10. CLOSING OF SALES AND PREPARATION OF OPERATION FOR NEXT DAY
O After resetting, sum up and collate cash in the drawer, and leave the drawer open.
O
Reset the total control lock to the position “OFF”, and pull
“M
a
”
key out.
O
Remove the paper cover, cut off and keep the printed journal paper.
O Confirm availability of the remaining journal paper and load it to the paper winding shaft.
-
8
-