Re-inking to the store message stamp, Note, Maintenance and inspection requirements – Toshiba MA-120 Series User Manual
Page 18: Other precautions, Removing the store meassage stamp
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
17. RE-INKING TO THE STORE MESSAGE STAMP
1. According to the Para. 16, remove the Store Message Stamp.
2. supply ink for replenishment over the reverse side of the Store Message Stamp.
NOTE:
If ink is excessively supplied, it may overflow. Therefore, pour it drop for several times until it does no
longer permeate. Use an ink designated by TEC.
18. MAINTENANCE AND INSPECTION REQUIREMENTS
1.
Daily requirements
(1) Automatic resetting of the register after closing your shop.
(2) Cut and keep the printed journal paper.
(3) Check and insure availability of receipt paper and journal paper,
(4) Always keep the drawer released after closing your shop.
(5) Turn off the control lock after closing your shop.
2.
Periodic requirements
(1) Inspect visibility of printing.
(2) Clean the duster cover.
19. OTHER PRECAUTIONS
1) Do not wipe off the cabinet or other plastic parts with a thinner or other volatile oils. If dirts are hard to
remove, wipe off them with a cloth soaked in neutral detergent and tightly squeezed.
2) Whenever the machine is not in use, cover it with the duster cover.
3) Keep this owners manual after you have read through.
- 1 6 -