Programming additional transmitters, Transmitter battery service – Chrysler 2008 300 SRT User Manual

Page 25

Advertising
background image

NOTE:

• The interior lights will turn off if you turn the ignition

switch to the ACC or ON position while the Panic
Alarm is activated. However, the exterior lights and
horn will remain on.

• You may need to be less than 35 ft (11 m) from the

vehicle when using the transmitter to turn off the
Panic Alarm due to the radio frequency noises emitted
by the system.

Programming Additional Transmitters
Refer to Sentry Key

, “Customer Sentry Key(Fob)

Programming.”

(See page 17 for more information.)

If you do not have a programmed transmitter, contact
your authorized dealer for details.

Transmitter Battery Service
The recommended replacement battery is one CR2032
battery.

NOTE:

• Perchlorate Material — special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

• Do not touch the battery terminals that are on the back

housing or the printed circuit board.

1. Battery access is through a door located on the rear of
the fob. Insert a small, flat blade screwdriver into the slot
and gently pry open the access door.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

23

2

Advertising
This manual is related to the following products: