Remote starting system - if equipped, How to use remote start – Chrysler 2008 300 SRT User Manual

Page 27

Advertising
background image

2. Closeness to a radio transmitter such as a radio station
tower, airport transmitter, and some mobile or CB radios.

REMOTE STARTING SYSTEM — IF EQUIPPED
This system uses the Remote Keyless Entry (RKE) trans-
mitter to start the engine conveniently from outside the
vehicle while still maintaining security. The system has a
targeted range of 328 ft (100 m).

NOTE:

The vehicle must be equipped with an auto-

matic transmission to be equipped with Remote Start.

How To Use Remote Start
All of the following conditions must be met before the
engine will remote start:

• Shift lever in PARK
• Doors closed
• Hood closed
• Trunk closed

• HAZARD switch off
• BRAKE switch inactive (brake pedal not pressed)
• Ignition key removed from ignition switch
• Battery at an acceptable charge level, and
• RKE PANIC button not pressed.

To Enter REMOTE START Mode

Press and release the REMOTE START button
on the RKE transmitter twice, within five sec-
onds. The parking lights will flash and the horn
will honk twice (if programmed). Then, the

engine will start and the vehicle will remain in the
REMOTE START mode for a 15 minute cycle.

NOTE:

• The park lamps will turn on and remain on during

REMOTE START mode.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

25

2

Advertising
This manual is related to the following products: