Replacement keys – Chrysler 2008 Sebring Sedan User Manual

Page 18

Advertising
background image

CAUTION!

Always remove Sentry Keys

from the vehicle and

lock all doors when leaving the vehicle unattended.

NOTE:

• The Sentry Key௡ Immobilizer System is not compat-

ible with some aftermarket remote starting systems.
Use of these systems may result in vehicle starting
problems and loss of security protection.

• Exxon/Mobil Speed Pass™ an additional Sentry Key௡,

or any other transponder equipped components on the
same keychain will not cause a key-related (transpon-
der) fault unless the additional part is physically held
against the ignition key

being used when starting the

vehicle. Cell phones, pagers, or other RF electronics
will not cause interference with this system.

All of the keys provided with your vehicle have been
programmed to the vehicle electronics.

Replacement Keys

NOTE:

Only keys that have been programmed to the

vehicle electronics can be used to start the vehicle. Once
a Sentry Key

௡ has been programmed to a vehicle, it

cannot be programmed to any other vehicle.

At the time of purchase, the original owner is provided
with a four-digit Personal Identification Number (PIN).
The PIN is required for authorized dealer replacement of
keys. Duplication of keys may be performed at an
authorized dealer or by using the Customer Key Pro-
gramming procedure. This procedure consists of pro-
gramming a blank key to the vehicle electronics. A blank
key is one which has never been programmed.

16

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising