Chrysler 2008 Sebring Sedan - Manual (Page 278)

driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations. AUTOSTICK
ா OPERATION
By placing the gear selector lever one shift-level below
the DRIVE position, it can be moved from side to side.
This allows the driver to select a higher or lower range of
gears. Moving the gear selector lever to the Left (-)
triggers a downshift and to the Right (+) an upshift. The
gear position will display in the instrument cluster on the
transaxle range indicator.
NOTE: In Autostick ௡ mode, the transaxle will only shift
up or down when the driver moves the gear selector
lever to the Right (+) or Left (-).
AutoStick
௡ is deactivated when the lever is shifted from
the AutoStick (+/-) position into the DRIVE position.
AutoStick ௡ Gear Selector Lever
276 STARTING AND OPERATING