To unlock the doors – Chrysler 2010 300 - Owner Manual User Manual

Page 22

Advertising
background image

NOTE:

Inserting the Key Fob with RKE transmitter into

the ignition switch disables all buttons on that RKE
transmitter; however, the buttons on the remaining RKE
transmitters will continue to work. Driving at speeds
5 mph (8 km/h) and above disables all RKE transmitter
buttons for all RKE transmitters.

To Unlock the Doors

Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver’s door or twice
within five seconds to unlock all doors. The turn signal
lights will flash to acknowledge the unlock signal. The
illuminated entry system will also turn on.

If your vehicle is equipped with Passive Entry, refer to
“Passive Entry System — If Equipped” under “Door
Locks” for further information.

Remote Key Unlock, Driver Door/All Doors 1st
Press
This feature lets you program the system to unlock either
the driver’s door or all doors on the first press of the
UNLOCK button on the RKE transmitter. To change the
current setting, proceed as follows:

• For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Electronic Vehicle
Information Center (EVIC) — If Equipped/Personal

Key Fob with RKE Transmitter

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

21

Advertising
This manual is related to the following products: