Tail/stop, tail, turn signal lamp, and, Backup lamp — 300c models – Chrysler 2010 300 - Owner Manual User Manual
Page 477
Advertising
![background image](/manuals/671726/477/background.png)
Tail/Stop, Tail, Turn Signal Lamp, and Backup
Lamp — 300C Models
1. Open the trunk.
2. Remove two fasteners from the back of the tail lamp
assembly.
3. Pull back the trunk liner.
4. Remove the remaining fastener from the back of the
tail lamp assembly.
5. Push the electrical connector locking tab to the side.
6. Disconnect the electrical connector.
476
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: