Left switch, Uconnect™ phone, Phone pairing – Chrysler 2011 200 - User Guide User Manual

Page 35

Advertising
background image

Left Switch

• Press the switch up or down to search for the next listenable station or select the next or

previous CD track.

• Press the button in the center to select the next preset station (radio) or to change CDs if

equipped with a CD Changer.

Uconnect™ Phone

• To determine if your vehicle is equipped with Uconnect™ Phone, press the Uconnect™ Phone

button

. If your vehicle has this feature, after a couple seconds you will hear a voice

prompt. If not, you will see a message on the radio “Uconnect phone not available”.

• The Uconnect™ Phone is a voice-activated, hands-free, in-vehicle communications system with

Voice Command Capability (see Voice Command section).

• The Uconnect™ Phone allows you to dial a phone number with your mobile phone using simple

voice commands.

• For vehicles equipped with Video Entertainment System (VES)™, refer to the Uconnect™

Phone section of the Uconnect™ User's Manual on the DVD for further details.

• For vehicles not equipped with VES™, refer to your vehicle Owner's Manual on the DVD for

further details.

NOTE:

The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth® Hands-Free

Profile, Version 0.96 or higher. For Uconnect™ customer support, call 1–877–855–8400 or visit
chrysler.com/uconnect.

Phone Pairing

NOTE:

Pairing is a one-time initial setup before using the phone. You will also need to follow the

Bluetooth® instructions in your cell phone user guide to complete the phone pairing setup.

• Press the Phone button

to begin.

• Wait for the “ready” prompt and BEEP.

• (After the BEEP), say “Uconnect setup”.

• (After the BEEP), say “phone pairing”.

• (After the BEEP), say “pair a phone”.

• Follow the audible prompts.

• You will be asked to enter a four-digit Personal Identification Number (PIN), which you will later

need to enter into your mobile phone. You can enter any four-digit PIN. You will not need to
remember this PIN after the initial pairing process.

• You will then be prompted to give the phone pairing a name (each phone paired should have a

unique name).

• Next you will be asked to give this new pairing a priority of 1 thru 7 (up to seven phones may be

paired); 1 is the highest and 7 is the lowest priority. The system will only connect to the highest
priority phone that exists within the proximity of the vehicle.

ELECTRONICS

33

Advertising