Keyless enter-n-go – Chrysler 2011 Country - Owner Manual User Manual

Page 40

Advertising
background image

4. Within 15-seconds, cycle the ignition Key Fob from the
OFF position to the ON/RUN position a minimum of
five times ending in the ON/RUN position (do not start
the engine)

.

5. Within 30 seconds, press the driver’s door lock switch
in the UNLOCK direction.

6. A single chime will sound to indicate the feature has
been changed.

7. To reactivate this feature, repeat the above steps.

8. If a chime is not heard, the program mode was
canceled before the feature could be changed. If neces-
sary, repeat the previous procedure.

The Unlock Doors Automatically On Exit feature can be
reactivated by repeating the above mentioned procedure
or by performing the procedure in the EVIC, Customer-
Programmable Features on vehicles so equipped.

NOTE:

Use the Lock Doors Automatically at 15 mph

(24 km/h) and Unlock Doors Automatically On Exit
features in accordance with local laws.

KEYLESS ENTER-N-GO
The Passive Entry system is an enhancement to the
vehicle’s Remote Keyless Entry (RKE) system and a
feature of Keyless Enter-N-Go. This feature allows you to
lock and unlock the vehicle’s door(s) without having to
press the RKE transmitter lock or unlock buttons.

NOTE:

• Passive Entry may be programmed ON/OFF; refer to

“Electronic Vehicle Information Center (EVIC)/
Personal

Settings

(Customer-Programmable

Fea-

tures)” in “Understanding Your Instrument Panel” for
further information.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

37

Advertising
This manual is related to the following products: